Extreme AP460S LED Status

Extreme AP460S

The following describes the status of the LED lights.

  • White, Steady : The device has a CAPWAP connection to ExtremeCloud IQ and is operating normally.
  • White, Slow-blinking: The device has a CAPWAP connection to ExtremeCloud IQ, but is operating on 802.3af power instead of 802.3at power.
  • Amber, Steady: The device is initializing, rebooting, or is running without a CAPWAP connection.
  • Amber, Slow-blinking: The device has no CAPWAP connection to ExtremeCloud IQ, and is operating 802.3af power instead of 802.3at power.
  • Amber, Fast-blinking: The device is upgrading its IQ Engine firmware.
  • Dark: Power is off.

Hardware Components

You can see the hardware components in the illustration below. The components are identified below by number:

1. Eth0 PoE+

2. Status light

3. Eth1

4. Built-in mounting brackets

5. USB port

6. Mirco USB Console port and Reset button

7. Ground

8. Air pressure valve. DO NOT REMOVE.

Last Update: March 13, 2022  

March 11, 2022 188 Mark Scarberry  Network
Total 0 Votes:

Tell us how can we improve this post?

+ = Verify Human or Spambot ?

Add A Knowledge Base Question !

You will get a notification email when Knowledgebase answerd/updated!

+ = Verify Human or Spambot ?

About The Author

I have worked in the computer repair field since the early '90s. I was a technician and then Coordinator of Computer Repair for Regional Education Service Agency II (RESA 2) for 18 years. I currently work for Wayne County Schools as a Network Engineer/Technology Specialist. I am responsible for the schools' Internet access, Wi-Fi, networks, servers, laptops, desktops, and operating systems and software.

Related posts